Radiology

Dry Pix Smart

Back

The most advanced DRYPIX has arrived, assisting smooth diagnoses.
Despite its compact size, enabling use anywhere in a medical facility, throughput is extremely high with no compromise on image quality.

More Gallery :

Interested :

Request Quote

+6018-9888 622

More Info :

Brochure

Product detail of Dry Pix Smart

FCR Capsula XL II Overview

Compact footprint, only 0.24 m²

FCR PRIMA II is one of the most compact and lightweight reader units on the market. The required space is comparatively smaller than other similar table-top systems and can be installed in any open space. Another advantage of this unit is that you don't need a darkroom any longer.

Enhanced IP processability

The new model FCR PRIMA II now offers enhanced processability with speed of up to 55 IPS/hr., almost double FCR PRIMA's 29 IPS/hr., yet leaving the easy operability and high functionality intact. As a result, the patient handling time at clinics and hospitals is reduced significantly leading to smoother operation and increased patient turnover.

All-in-one workstation

FCR PRIMA Console and FCRView are an all-in-one viewers that turns your desktop into a multi-function workstation for all your radiographic imaging needs. You can initiate exposures, process and print your studies and backup patient information all within a single unit.

Compact footprint, only 0.24 m²

Enhanced IP processability

Stable high-quality images

Although this is a compact machine its excellent image quality is the same as that produced by the rest of the FCR range. Image Intelligence™, Fujifilm's proprietary image processing technology, enhances image contrast and sharpness, without any deterioration of details. FCR PRIMA T supports accurate diagnosis by offering stable and optimized image quality.

MFP (Multi-Frequency Processing)*
Enhances FCR images. All diagnostic scopes will be enhanced except for noise. * Optional Software

FNC (Flexible Noise Control)
Provides a non-grainy image by mainly isolating and suppressing the noise for the signal.

MFP (Multi-Frequency Processing)* Enhances FCR images. All diagnostic scopes will be enhanced except for noise. * Optional Software

System Configuration

All-in-one workstation

Specifications

Standard Components	FCR CAPSULA XLII Image Reader Unit (Model: CR-IR 359) AC power cord
Other System Components	Optional upgrade kit for 50-micron reading with HR-V or HR-VI IP cassette type CC, LC, CH CR Console, CONSOLE ADVANCE*, AWS-c Dry Imager: DRYPIX 2000, 4000, 7000
Supplies	Imaging Plate: ST-VI: 35 × 43 cm (14″ × 17″), 35 × 35 cm (14″ × 14″), 10″ × 12″, 8″ × 10″, 24 × 30 cm, 18 × 24 cm, 15 × 30 cm HR-V: 24 × 30 cm, 18 × 24 cm* HR-VI: 24 × 30 cm, 18 × 24 cm* IP Cassette: Type CC: 35 × 43 cm (14″ × 17″), 35 × 35 cm (14″ × 14″), 10″ × 12″, 8″ × 10″, 24 × 30 cm, 18 × 24 cm, 15 × 30 cm Type LC: 35.4 × 124.5 cm, 35.4 × 101.7 cm, 35.4 × 83.7 cm, 25.2 × 58 cm, 24 × 57 cm Type CH: 24 × 30 cm, 18 × 24 cm* (For 50-micron reading with HR-V or HR-VI)
Number of Stacker	1
Reading Gray Scale	12 bits
Network	10 Base T / 100 Base TX
Dimensions (W × D × H)	590 × 380 × 810 mm (23″ × 15″ × 32″)
Dimensions (W × D × H)
Weight	99 kg (218 lbs.)
Power Supply Conditions	Single phase 50 - 60 Hz AC 120 - 240 V ±10% 5 A (max)
Environmental Conditions	Operating Conditions: Temperature: 15 - 30 °C Humidity: 40 - 80 % RH (No dew condensation) Non-operating Conditions: Temperature: 0-45 °C Humidity: 10 - 90 % RH (No dew condensation)

Under "Required Time” in the table above, figures in parentheses are at high-speed mode.
Image erase time on IP is directly related to the exposure made. It is assumed to be at 25 mR for ST-VI and 600 mR for HR-V.
The performance described above shows typical values. It varies depending on the exposure level.

Processing Capacity

IP Type		Required Time
ST-VI	35 × 43 cm (14″ × 17″)	Approx. 58 (41) sec.
ST-VI	35 × 35cm (14″ × 14″)	Approx. 52 (38) sec.
ST-VI	10″ × 12″	Approx. 49 sec.
ST-VI	8″ × 10″	Approx. 41 sec.
ST-VI	24 × 30 cm	Approx. 48 sec.
ST-VI	18 × 24 cm	Approx. 39 sec.
ST-VI	15 × 30 cm	Approx. 49 sec.
HR-V	24 × 30 cm**	Approx. 59 sec.
HR-V	18 × 24 cm***	Approx. 51 sec.
HR-VI	24 × 30 cm**	Approx. 59 sec.
HR-VI	18 × 24 cm***	Approx. 51 sec.

Figures in parentheses and conditions are the same as those of “Time Required for IP Feed / Load".
The time required to change the cassette is assumed to be 0 (zero) seconds.

Time to Display on CR Console:

Approx. 42 sec. in case of 35 × 43 cm (ST-VI) with 100-micron reading
Approx. 32 sec. in case of 18 × 24 cm (HR-V)*** with 50-micron reading

Time to Print on DRYPIX 4000 through network via CR Console:

Approx. 145 sec. in case of 35 × 43 cm (ST-VI) with 100-micron reading
Approx. 140 sec. in case of 18 × 24 cm (HR-V)*** with 50-micron reading

Reading Specification

Inches	Metric	Reading Specification
		Standard Pixel-density	High Pixel-density
		High-speed mode	Standard mode
14″ × 17″ (ST-VI)	35 × 43 cm (ST-VI)	5 pixels / mm	10 pixels / mm
14″ × 14″ (ST-VI)	35 × 35 cm (ST-VI)	5 pixels / mm	10 pixels / mm
10″ × 12″ (ST-VI)	24 × 30 cm (ST-VI)	—	10 pixels / mm
8″ × 10″ (ST-VI)	18 × 24 cm (ST-VI)	—	10 pixels / mm
—	15 × 30 cm (ST-VI)	—	10 pixels / mm
—	24 × 30 cm (HR-V)**	—	20 pixels / mm
—	18 × 24 cm (HR-V)***	—	20 pixels / mm
—	24 × 30 cm (HR-VI)**	—	20 pixels / mm
—	18 × 24 cm (HR-VI)***	—	20 pixels / mm

IP Cassette

Approx. 145 sec. in case of 35 × 43 cm (ST-VI) with 100-micron reading
Approx. 140 sec. in case of 18 × 24 cm (HR-V)*** with 50-micron reading

IP Cassette

Scroll